How do I set up my Nidecker Supermatic®
Please refer to the highlights in the video below:.
Please refer to the highlights in the video below:.
To find your size, please check the latest Supermatic® Size Chart below. The size chart takes into account the significant volume differences we found when testing other brands of snowboard boots.
The Nidecker Supermatic® is compatible with any snowboard boot an the market today. For optimum performance, we engineered Nidecker boots to work perfectly with Supermatic® thanks to their minimalist outer shell and seamless Transition Zone between o
Likely due to upward force or snow & ice accumulation. Firstly, and most importantly, please do not use your boot to push the lever down - it's harder to control the force with your boot than with your hand, which could lead to lever breakage.
Due to unintended strap length adjustment:. Due to it not being closed correctly/fully:
The Nidecker Supermatic® comes with our Offset Disc, which allows you to mount your Supermatic® to Channel, 3D, 4x4 or 4x2 binding mounts. There's not a mounting system in use today which Supermatic® won't fit. For more information on the Offset Disc
Really easy! Push the release lever down with your fingers until it hits the stopper. We designed it to be oversize for easy use, even when wearing gloves. Although it's tempting to use your boot to push the lever, we don't recommend it, because you'
Absolutely. We designed Supermatic® to work in all conditions, whether that means deep snow, steep terrain or even sketchy off-camber sections. The secret is the straps; leave the highback in the upright position and use them just like traditional tw
We've designed Supermatic® to work no matter how tight you like to run your straps. For optimum performance, we advise you to ride them "snug, but not too tight" to allow seamless and swift entry & exit and avoid any pressure points. Most people like
Absolutely! Fold your highbacks down for space-saving storage or easy transport in a boardbag. Pro tip: open the ankle & toe straps, then fold the highbacks down for maximum space efficiency.
Due to the way the highback is attached to the highback bottom, highback rotation is not currently supported on Supermatic®. But you can easily adjust the forward lean for more of a direct feeling into your edges.
You'll have the best possible experience when your heel and toe overhang are balanced on the board. In order to achieve this, use Offset Disc, which comes with the bindings. For more information, check:. https://www.nidecker.com/en/content/469-how-to
Your board should be properly attached to you with an approved retention device at all times while riding or walking. We have included a leash for your convenience, please use it. If your retention device is removed, for any reason, turn the board up